Open End Rack Hanger Rods
Unlike S hooks which hang at a slant, our hanger rods have
compound curves and hang straight. These rods were designed to be
used with the HD30B, HD40B, HD48, GA18RT, GA27RT and all
commercial racks with a COM prefix.
If you have ceilings 9 feet or over you may want to consider
our rack hanger rods. Quick links are not necessary to fasten
hanger rods to your rack or your ceiling hooks and we make them
with a 8 1/2 inch, 12 inch, 15 1/2 inch, 20 inch, 24 inch,
27 1/2 and 30 inch drop. See recommended lengths below.
PRICES: (when ordered with pot racks)
1/4 Solid stainless steel rack hanger rods:
- 8 1/2" drop ------$10.00 each
- 12" drop ---------$12.00 each
- 15 1/2" drop -----$12.00 each
- 20" drop ---------$14.00 each
- 24" drop ---------$16.00 each
- 27 1/2" drop -----$16.00 each
- 30" drop ---------$18.00 each
- For a drop of less than 8 1/2", look at our 3 1/2" and 5 1/2
" S-Hooks.
- For a drop of over 30", you could use a combination of lengths.
Recommended hanger rod lengths for people from 5' 4" to
5' 10" tall. If you are under 5' 3", you might want to move up
one length and if you are over 6', you might want to move down one length. It
would not hurt to take some measurements.
- For the HD30B, HD40B, HD48B, GA18RT and GA27RT
- 9 foot ceiling -- 12"
- 10 foot ceiling - 24"
- NOTE: You will need 3 hangers for the HD48B and 2 for all the rest above.
- For the Commercial Series: (with a COM prefix)
- 9 foot ceiling -- 15 1/2"
- 10 foot ceiling - 27 1/2"
- NOTE: You will need 4 hangers for all commercial racks above.
NOTE: There will be no additional shipping charges on hanger rods when ordered with rack.
|
HR24